EA
Construction Technology of Squat Silo Roof Supported by Cable Net and Finite Element Research
TOTAL VIEWS: 6085
Abstract
Aiming at the construction technology of a large-diameter top of squat silo by a steel stranded cable net, Perform ANSYS finite element analysis, Simulate calculation of the bearing capacity of the steel stranded cable net platform built by steel strands with different tensile forces. The results are analyzed and researched and compared with the actual construction situation. It is found that after the cable net platform set up by the steel strand is subjected to the upper load, the degree of downward deflection will continue to decrease with the increase of the tensile force of the steel strand. The stress and strain will increase with the increase of the pretension of the steel strand. In actual construction, when the diameter and pitch of the steel strand are constant, the tensile force of the steel strand used should be increased as much as possible.
References
[1] Wang Haipeng, Liu Yang, Jin Mei. (2008). Research status and development trend of safe grain storage in shallow silo [J]. Grain Storage, 2008, 37(6): 27-31.
[2] Zhao Shaowei, Xia Lichun. (2012). Construction process and monitoring of large-diameter silo’s sliding-form towed steel structure roof [J]. Journal of Tianjin Chengjian University, 2012(4): 254-257.
[3] Wang Jinchao, Li Xiaoqiang, Shan qin. (2016). Construction Technology of Large Span Conical Roof Silo [J]. Construction Technology, 2016, 45(11): 20-23.
[4] Zheng Youhuan, Zhang Chunwei, Zhou Zhaohui. (2020). Application of Bailey Frame Steel Platform Support System in Construction of Silo Roof Structure [A]. Zhejiang Society of Civil Architecture. The 26th Civil Engineering And Construction Technology Exchange Conference of Six Provinces and one City in East China (Volume 1) [C]. Zhejiang Society of Civil Architecture: Construction Technology Editorial Department, 2020: 4.
[5] Jin Ze, Xu Feng, Wu Yingqiang. (2020). Design and Construction of Steel Truss Supporting System on the Roof of Shallow Round Warehouse [J]. Building Construction, 2020, 42(07): 1200-1203.
[6] Bi Laibin. (2019). Research on the Standardized Design and Construction Technology of the Roof Structure of the Assembled Silo Based on BIM Technology [D]. Henan University of Technology, 2019.
[7] He Lin, Wang Jialin. (2015). Equivalent load-real reinforcement cooling method for simulating effective prestress [J]. Journal of Highway and Transportation Research and Development, 2015, 32(11): 75-80.
How to cite this paper
Construction Technology of Squat Silo Roof Supported by Cable Net and Finite Element Research
How to cite this paper: Hairong Huang, Guoran Hao, Menghua Lv. (2022). Construction Technology of Squat Silo Roof Supported by Cable Net and Finite Element Research. Engineering Advances, 2(1), 18-25.
DOI: http://dx.doi.org/10.26855/ea.2022.06.002
More Articles
- Discussion on Construction Technology of Formwork and Scaffold Engineering
- Industrial Engineering and Lean Management for Intelligent Manufacturing
- Urban Safety Risk Assessment Technology Based on Risk Correction
- PAT Monitoring of Coating Pan by NIR - PLS Method Calibration Approach
- Study on the Spatiotemporal Response Characteristics of Effective Discharge Radius of Bedding Drilling
- Human Skeleton Coordinate Pose Recognition