EA
Study on Influencing Factors of Construction Accuracy of Cylinder Hydraulic Slip Forming Construction of Grain Silos
TOTAL VIEWS: 5878
Abstract
Precision control is an important content to ensure the quality of cylinder hydraulic slip forming construction. There are many factors influencing it and there are very complicated relations among them. In order to clarify the hierarchical relationship and influence among the influencing factors, the factors influencing the construction accuracy of hydraulic slip forming were identified with the back-ground of a new grain silo project in Henan province. The multi-layer recursive model of influencing factors was established with the method of ISM-MICMAC theory, and the weight ratio of each influencing factor was calculated by AHP. Finally, through the analysis of the important aspects to ensure the construction quality of the Grain Silo Wall hydraulic slipform, and the use of ISM-MICMAC and AHP to clarify the relationship between the influencing factors, found out the most important factors affecting the construction accuracy, it provides a certain reference for the successful completion of the construction of Silo Wall.
References
[1] Peng, X. C. (2020). Guide to understanding and application of engineering technical standards for sliding formwork [M]. Beijing. China Building Industry Press, 2020.
[2] Zhao, P. (2019). The precision control of sliding form construction and the treatment of common problems are discussed [J]. Construction Materials & Decoration, 2019, 571(10): 27-28.
[3] Nie, C. M. (2011). Handbook of Prevention and Control of Common Defects in construction engineering quality [M]. Beijing: China Building Industry Press, 2011.
[4] Du, D., Pang, Q. H.,Wu, Y. (2015). Modern comprehensive evaluation method and case selection [M]. 3rd edition. Beijing: Tsinghua University Press, 2015.
[5] Huang, W., Zhang, L. M., et al. (2014). Analysis on quality influencing factors of the rammed-earth wall based on an interpretative structural model [J]. Journal of Xi’an University of Architecture & Technology (Natural Science Edition), 2014, 46(3): 333-341.
[6] Zhao, H. R., Jiang, H. J., Guo, S. (2015). Research on Forewarning Index System for Management of Grid Corporations Based on ISM and MICMAC Model [J]. Shanxi Electric Power, 2015, 43(3): 11-15．
[7] Gao, X. Q., Chen, W., Zhao, Z. R. (2018). Application of AHP Based on Expert Group Decision in PPP Project Risk Management [J]. Construction Technology, 2018, 47(S1): 985-988.
[8] Yang, Z. Z., Fan, Y. Y. (2018). Risk Analysis on the Girder of Cable-Stayed Bridges at the Construction Phase: A Study Based on ISM and AHP [J]. Journal of Engineering Management, 2018, 32(3): 124-128.
How to cite this paper
Study on Influencing Factors of Construction Accuracy of Cylinder Hydraulic Slip Forming Construction of Grain Silos
How to cite this paper: Hairong Huang, Menghua Lv, Guoran Hao. (2022). Study on Influencing Factors of Construction Accuracy of Cylinder Hydraulic Slip Forming Construction of Grain Silos. Engineering Advances, 2(1), 80-87.
DOI: http://dx.doi.org/10.26855/ea.2022.06.007
More Articles
- Discussion on Construction Technology of Formwork and Scaffold Engineering
- Industrial Engineering and Lean Management for Intelligent Manufacturing
- Urban Safety Risk Assessment Technology Based on Risk Correction
- PAT Monitoring of Coating Pan by NIR - PLS Method Calibration Approach
- Study on the Spatiotemporal Response Characteristics of Effective Discharge Radius of Bedding Drilling
- Human Skeleton Coordinate Pose Recognition